How To Clean A Motorcycle Suit – A Complete Guide For You To Do It

Cleaning a motorcycle suit is essential not only for maintaining its appearance but also for ensuring its longevity and performance. Here’s a complete guide to help you clean your motorcycle suit properly:

Note: Always check the care label and instructions provided by the manufacturer before proceeding, as different materials and designs may have specific cleaning requirements.

Materials You’ll Need:

1. Mild detergent or specialized gear cleaner
2. Soft-bristle brush
3. Soft cloths or microfiber towels
4. Water source
5. Bathtub or large sink
6. Hangers or drying rack
7. Waterproofing spray (optional)

Step-by-Step Cleaning Guide:

1. Preparing the Suit:

• Check the care label for any specific cleaning instructions from the manufacturer.
• Empty all pockets and remove any removable armour or padding.

2. Spot Cleaning:

• If there are visible stains or dirt spots, use a soft-bristle brush to gently scrub the affected areas.
• If necessary, use a small amount of mild detergent diluted in water to help remove stubborn stains. Test a small, hidden area first to ensure the detergent won’t damage the fabric.

3. Washing:

• Fill a bathtub or large sink with lukewarm water.
• Add a small amount of mild detergent or specialized gear cleaner to the water and mix well. Avoid using harsh detergents or bleach, as they can damage the fabric and colours.
• Immerse the suit in the water and gently agitate it to ensure the detergent penetrates the fabric.
• Let the suit soak for about 20-30 minutes. Do not scrub or wring the suit, as this can damage the fabric and stitching.

4. Gently Cleaning:

• After soaking, use a soft-bristle brush to gently scrub the suit, paying extra attention to areas with dirt or stains.
• Rinse the suit thoroughly with clean water to remove all detergent residues.

5. Drying:

• Gently squeeze excess water from the suit without wringing it. Do not twist or wring the fabric.
• Lay the suit on a clean, dry towel and roll it up to absorb more water.
• Hang the suit on a hanger or drying rack in a well-ventilated area, away from direct sunlight and heat sources. Avoid using a clothes dryer, as the heat and agitation can damage the fabric and reduce its protective qualities.
• Reshape the suit as it dries to maintain its original form.

6. Armor and Padding:

• Clean removable armour and padding separately by wiping them with a damp cloth. Allow them to air dry completely before reinserting them into the suit.

7. Waterproofing (Optional):

• If your suit is designed to be waterproof or water-resistant, consider using a specialized waterproofing spray after cleaning and drying. Follow the manufacturer’s instructions for application.

8. Storage:

• Once the suit is completely dry, store it in a cool, dry place away from direct sunlight. Avoid hanging it near sharp objects that could puncture the fabric.

Final Thoughts

Regularly cleaning your motorcycle suit and following proper care guidelines will help extend its lifespan and maintain its protective properties. Always refer to the manufacturer’s instructions and recommendations for the best cleaning practices specific to your suit.